We offer file service for KSG 95320 memory encoding for SCL ELV ESL Emulator.
You can buy emulator -> HERE
That means you must upload file , we will decode it and you will receive all needed data to write into emulator.
You can check video how it works -> HERE
- Passat B6 2006-2015
- Passat CC 2009-2012
- CC 2012-2017
You will receive:
- POWER CLASS
- KEY ID
- MAC ELV
How do I know if my module is faulty....?
A faulty micro switch or relay can cause one or more of these symptoms:
- Takes several attempts before car will start
- Steering Lock fault message or code
- Steering Wheel warning shows orange or red
- Clicking noise when key inserted
- Will not start
- Vehicle immobilized
Do I have to get my car reprogrammed?
It depends if you tried another SCL from other car, it might happend that you erase KSG with doing that! ECU immo must be ON and KSG data must be intact.
If you are still able to start the car (even though it may take several attempts),
then no recoding / reprogramming is required.
You just fit the emulator back in. This is an advantage over fitting a replacement new or emulator.
Where is the Module Located......?
On the lower half of the steering column in a black box.
To remove the module, simply prise off the plastic cover and remove 3 torx screws.
There is no need to remove the whole steering lock.
Reference OE/OEM Number: